🚚 Free Worldwide Shipping on All Orders!Shop Now
HomeStore
Kramer US-size Wall-Plate Receiver, with White 1-gang Design Frame - 1 Output Device - 295.28 ft Range - 1 x Network (RJ-45) - 1 x HDMI Out - Twisted Pair - Wall Plate
Kramer US-size Wall-Plate Receiver, with White 1-gang Design Frame - 1 Output Device - 295.28 ft Range - 1 x Network (RJ-45) - 1 x HDMI Out - Twisted Pair - Wall Plate
$54.26
Original: $180.88
-70%Kramer US-size Wall-Plate Receiver, with White 1-gang Design Frame - 1 Output Device - 295.28 ft Range - 1 x Network (RJ-45) - 1 x HDMI Out - Twisted Pair - Wall Plate—
$180.88
$54.26The Story
Kramer US-size Wall-Plate Receiver, with White 1-gang Design Frame
The WP-572 is a PoC DGKat™ twisted pair receiver for HDMI signals. The WP-571 converts an HDMI signal to a single twisted pair signal and the WP-572 converts the twisted pair signal back to an HDMI signal
- Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
- HDTV Compatible
- HDCP Compliant
- DGKat™ Signal Integration - Kramer's unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
- HDMI Support - x.v.Color™, up to 7.1 Uncompressed Audio Channels.
- 3D Pass-Through
- System Range - Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables. Note: Transmission range depends on the signal resolution, graphics card and display used. If using third-party shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly
- Cable - Requires shielded twisted pair (STP) cable. For optimum range
- EDID PassThru - Passes EDID signals between the source and display
- ON LED - Lights red when receiving power only, orange when either input or output and power are attached, and green when both an active input and output are attached
- Power Connect™ System - A single connection to the transmitter powers the receiver
- Dimensions - 3.3cm x 3.6cm x 10.4cm (1.3" x 1.42" x 4.1") W, D, H
- Wall Plate Size - 1 gang US
Description
Kramer US-size Wall-Plate Receiver, with White 1-gang Design Frame
The WP-572 is a PoC DGKat™ twisted pair receiver for HDMI signals. The WP-571 converts an HDMI signal to a single twisted pair signal and the WP-572 converts the twisted pair signal back to an HDMI signal
- Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
- HDTV Compatible
- HDCP Compliant
- DGKat™ Signal Integration - Kramer's unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
- HDMI Support - x.v.Color™, up to 7.1 Uncompressed Audio Channels.
- 3D Pass-Through
- System Range - Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables. Note: Transmission range depends on the signal resolution, graphics card and display used. If using third-party shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly
- Cable - Requires shielded twisted pair (STP) cable. For optimum range
- EDID PassThru - Passes EDID signals between the source and display
- ON LED - Lights red when receiving power only, orange when either input or output and power are attached, and green when both an active input and output are attached
- Power Connect™ System - A single connection to the transmitter powers the receiver
- Dimensions - 3.3cm x 3.6cm x 10.4cm (1.3" x 1.42" x 4.1") W, D, H
- Wall Plate Size - 1 gang US
